Ingersoll Rand SMB050-10-8V Silver Series Manual Chain Hoist is a 5 metric ton (11,000 lb) capacity manual chain hoist configured with a 10 ft standard lift, 8 ft hand chain drop, and 2 chain falls. The Silver Series uses high-strength, all-stamped steel construction for decreased weight and better impact resistance, with roller bearings on the input shafts for increased efficiency and easier lifting. The SMB050 is the 5 metric ton model in the Silver Series and uses a two-chain-fall arrangement.
The SMB050 uses a 9 x 27 mm load chain and requires 83 lb of pull to lift the rated load. The manufacturer specifies 187 ft of chain overhaul per 1 ft of load lift and a 2.4 lb/ft load-chain weight. The hoist also features encased and retained roller bearings, a self-adjusting disc-type double-pawl mechanical load brake, double hand-chain guides, hardened swivel-latch hooks, and overload protection through a clutch that slips in the lifting direction only.
Type: Manual Chain Hoist | Series: Silver Series | Model: SMB050-10-8V | Capacity: 5 Metric Tons (11,000 lb) | Standard Lift: 10 ft | Hand Chain Drop: 8 ft | Chain Falls: 2 | Load Chain Size: 9 x 27 mm | Pull to Lift Rated Load: 83 lb | Chain Overhaul: 187 ft per 1 ft of Load Lift | Load Chain Weight: 2.4 lb/ft | Overload Protection: Slip Clutch | Minimum Headroom: 28 in | Shipping Weight with 10 ft Lift: 90.2 lb
Features:
- High-strength, all-stamped steel construction provides decreased weight and better impact resistance.
- Two chain falls provide the specified lifting arrangement for the 5 metric ton SMB050 capacity.
- Encased and retained roller bearings on the input shafts support increased efficiency and ease of maintenance.
- Self-adjusting disc-type double-pawl mechanical load brake provides controlled load holding.
- Overload protection uses a clutch that slips in the lifting direction only.
- Nickel/chrome-plated exterior and zinc-plated frame components provide increased corrosion resistance.
- Double hand-chain guides help provide smooth operation when pulling excess hand chain.
- Open-frame construction allows easier cleaning and inspection.
- Hardened swivel-latch hooks provide the specified hook configuration for the Silver Series.
- CE-certified hoists meet or exceed regional requirements including ASME B30.16 and HST-2M.
Applications:
- Construction and jobsite lifting — raising and positioning equipment and materials within the 5 metric ton rated capacity.
- Industrial maintenance — lifting machinery components and equipment during repair and service operations.
- Rigging — controlled manual lifting using the two-chain-fall configuration.
- Material handling — positioning loads in workshops, facilities, and industrial environments where a 10 ft lift is required.
FAQs:
- Q: What is the capacity of the SMB050-10-8V?
A: The hoist is rated for 5 metric tons, equivalent to 11,000 lb, when operated according to manufacturer specifications and proper lifting procedures. - Q: What does the 10 ft standard lift mean?
A: The 10 ft lift identifies the vertical load-travel configuration for this specific hoist. - Q: What does the 8 ft hand chain drop mean?
A: The 8 ft hand-chain drop identifies the operating hand-chain configuration specified for this SKU. - Q: How many chain falls does the SMB050-10-8V use?
A: It uses 2 chain falls. The SMB050 uses a two-chain-fall arrangement for its 5 metric ton capacity. - Q: What type of overload protection does this model have?
A: The Silver Series uses an overload clutch that slips in the lifting direction only. - Q: What size load chain does the SMB050 use?
A: The SMB050 uses a 9 x 27 mm load chain. - Q: How much pull is required to lift the rated load?
A: The specified pull to lift the rated 5 metric ton load is 83 lb. - Q: What is the minimum headroom for the SMB050?
A: The manufacturer specifies 28 in minimum headroom for the SMB050.
| SKU | CAPACITY | # FALLS | PULL TO LIFT RATED LOAD |
CHAIN O'HAULED TO LIFT LOAD 1 FT |
CHAIN SIZE MM |
CHAIN WEIGHT PER FOOT |
SHIPPING WEIGHT WITH 10' OF LIFT |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LB | METRIC TONS | LB | KG | FT | M | LB | KG | LB | KG | |||
| SMB005 | 1,100 | 0.50 | 1 | 55 | 25 | 25 | 7.6 | 5 x 15 | 0.6 | 0.3 | 23.5 | 10.68 |
| SMB010 | 2,200 | 1 | 1 | 64 | 29.1 | 39 | 11.9 | 6 x 18 | 0.6 | 0.3 | 26.8 | 12.18 |
| SMB015 | 3,300 | 1.50 | 1 | 69 | 31.4 | 58 | 17.7 | 7 x 21 | 1 | 0.5 | 38.5 | 17.5 |
| SMB020 | 4,400 | 2 | 1 | 77 | 35 | 75 | 22.9 | 8 x 24.6 | 1.1 | 0.5 | 42.4 | 19.27 |
| SMB030 | 6,600 | 3 | 1 | 100 | 45.5 | 116 | 35.4 | 10 x 30 | 2.1 | 1 | 70.4 | 32 |
| SMB050 | 11,000 | 5 | 2 | 83 | 37.7 | 187 | 57 | 9 x 27 | 2.4 | 1.1 | 90.2 | 41 |
Looking for more information about the Ingersoll Rand Hoist? Click here to view the Catalog
For help choosing the proper Ingersoll Rand Hoists for your assembly application, please email info@intlairtool.com or call (800) 608-5210
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
